|
|
ACTIVE "CAMAC" PRODUCT LINE
|
|
TR
|
ANALOG DIGITIZER, with 1, 4, 8 or 16 individual, 40Mhz, 12 bit channels each with 512k samples of Static RAM. Multi-mode, all addresses stored, high input, single and differential inputs, FASTCAMAC level 1 or 2 read, signal averaging, valid data verification, input signal gate control, completely programmable.
Up to 2M samples per chan in reduced channel, 'shared memory', programmable modes |
|
|
LEGACY "CAMAC" PRODUCT LINE
|
| ADC32A |
ADC, 32 Channel, 12 bit, 100khz Scanning ADC with 2Msample SRAM |
| ADC616 |
ADC, 6 Individual, 16 bit ADC’s with Programmable Gain Inputs |
| ADC3216 |
ADC, 32 Channel, 16 bit Scanning ADC with Programmable Gain |
| ADC1612 |
ADC, 16 Channel, 12 bit Scanning, Integrating ADC for noisy environments |
| ADC1616 |
ADC, 16 Channel, 16 bit Scanning, Integrating ADC for noisy environments |
| ADC-L |
ADC, 16 Channel, 16 bit Scanning, High/Low limits for each channel |
| CS |
CONTACT SENSE INPUT, Optically Isolated, 24 bits, dc or ac Input |
| D/A16 |
DAC, 2 Individual, 16 bit DAC’s |
| DAC816 |
DAC, 8 Individual, 16 bit DAC’s, Current or Voltage Outputs |
| OR |
OUTPUT REGISTER, 2 Channels, 24 bits, TTL, Visual Display |
| OR-2,3,4 |
OUTPUT REGISTER, 16 Channels, TTL, Relay or Optically Isolated |
| PSC |
POWER SUPPLY CONTROLLER, Two 12bit DAC’s with 10 Relay Outputs |
| S1-1 |
COUNTER, 4 Channel, 200Mhz, 24 bits each Individually Gated |
| S12 |
COUNTER, 12 Channels, 100Mhz, 24 bits, High Speed Gate and Reset |
| SMC24B |
STEPPING MOTOR CONTROLLER AND DRIVER, 24 bits, 6 amp Outputs |
| SMC-L |
STEPPING MOTOR CONTROLLER and DRIVER, 16 bits, 4 amp Outputs |
| SMC-R |
DUAL, STEPPING MOTOR CONTROLLER and DRIVER, 16 bits, 2 amp Output |
| TR16S/H |
ANALOG DIGITIZER, 16 Channel Scanning, 1Msample SRAM,
Protected to 200vdc |
| TR612/3 |
ANALOG DIGITIZER, 6 Channels, 3Mhz, 12 bits,
512ksample SRAM per channel. |
|
|
