 |
|
MODEL ADC616 |
SIX, INDIVIDUAL, 16 BIT,
ADC CHANNELS
FEATURES:
SIX INDEPENDENT CHANNELS, EACH CONTAINING:
16 BIT ANALOG TO DIGITAL CONVERTER
- PROGRAMMABLE GAIN INPUT INSTRUMENTATION AMPLIFIER
- CONTINUOUS SCAN OR SINGLE CYCLE MODE
- SINGLE WIDTH CAMAC MODULE
The JOERGER ENTERPRISES, INC. MODEL ADC616 offers six, completely
independent, 16 bit analog to digital converters. Each channel has a programmable gain
instrumentation amplifier input and sample and hold so that it can be tailored for the
application. It has two operating modes, single cycle and continuous mode. The converted
data is stored in latches that are interlocked with the read commands. This provides the
ability to read the present value of any channel without interrupting the modules
operation. When running in the single cycle mode a complete LAM structure is provided to
monitor the modules operation. To reduce noise susceptibility, each channel has a
multipole low pass RC filter. This is a no charge option and can be added upon request. To
insure accuracy, the high resolution analog components are powered by a tracking voltage
regulator. We believe the features, accuracy and ease of use, will allow this module to
handle a wide variety of applications. Special care has been taken with the analog layout
and grounding in an effort to reduce noise and channel crosstalk. Each analog front end
also has its power and grounds filtered from the digital section and from the other analog
inputs. These precautions provide excellent results.
SPECIFICATIONS:
INPUT RANGE |
+10v, +5v, +10v,
+5v independently settable for each channel. |
| INPUT IMPEDANCE |
100M Ohms |
| INPUT PROTECTION |
+35v DC |
| ACCURACY |
+.005% |
| CONVERSION TIME |
35usec |
| RESOLUTION |
16 Bits |
| EXTERNAL TRIGGER |
Negative TTL Pulse |
| OPERATING MODE |
Continuous or Single Cycle
Programmably Set |
CAMAC COMMANDS:
| 00-5 |
Reads out data on Read lines
1-16, Channels 1-6. |
10 |
Reads out gain settings, two per
channel, the operating mode and module active status. |
80 |
Tests LAM flip-flop. |
90 |
Resets module, sets all channels
to a gain of one and operating mode to single cycle. |
| 100 |
Clears LAM flip-flop. |
| 170 |
Sets input gain for each channel
and the operating mode. |
| 240 |
Disables LAM request. |
| 250 |
Convert Command |
| 260 |
Enables LAM request. |
(C+Z)S2 or
Power Up |
Resets module. |
Q |
A Q=1 is returned for commands
00-05, 10, 170, 250, and 80
if LAM is set and enabled. |
| X |
An X response is generated for
all commands. |
| L |
An L is generated at the
completion of a cycle in single cycle mode, reset by trigger. |
| CONNECTORS: |
INPUT, Cannon DB25P,
Mating Connector DB25S |
|
TRIGGER, LEMO
RA00250 |
| INDICATORS: |
"N"
Module
"ACTIVE"
"LAM"
"SINGLE CYCLE" |
Addressed
Module Active
Single Cycle Complete
Set for Single Cycle Mode |
POWER
REQUIREMENTS: |
+6v, 280ma; +24v,
210ma; -24v, 330ma |
| SIZE: |
Single width CAMAC
module. |
| TEMPERATURE RANGE: |
20° C to 50° C |
| OPTIONS: |
1. Gain
of 1, 10, 100, 1000
2. Low Pass Filters |
JOERGER ENTERPRISES, INC 166 Laurel Road, East Northport, NY 11731
USA
| 1-631-757-6200 |
(Fax 1-631-757-6201) |
www.joergerinc.com |
[HOME] [CAMAC] [VME]
[NIM]
|
